Toshiba Aplio400 convex array Original Ultrasound Probe PVT-375BT

• Model: PVT-375BT
• Application: OB/GYN, Abdominal, 6C1
• Type: Convex array
• Frequency: 2.0-6.0 Mhz
• Compatible system: Aplio 300, Aplio 400, Aplio 50 SSA-700A, Aplio 50 SSA-750A, Aplio 500, Aplio 80 SSA-770A, Aplio XG SSA-790A, Aplio XV, Artida SSH-880CV, Xario SSA-660A

All transducers require proper care, cleaning, and handling. This section contains information and instructions to help you effectively clean, disinfect, and sterilize your transducer for use in ultrasound systems. In addition, these instructions will help you avoid damage during the cleaning, disinfection, and sterilization processes that could void your warranty.

Reasonable care includes inspection, cleaning, and, if necessary, disinfection or sterilization. The transducer must be cleaned after each use. Do not allow contaminants to dry on the transducer. You can use an enzymatic foam spray to remove dried contaminants.

Before each use, carefully inspect all parts of the transducer. Check for cracks or other damage that could compromise the integrity of the transducer. If any damage occurs, report it to your authorized service representative and discontinue use of the transducer.

1. Wear sterile gloves to prevent infection.
2. After cleaning, wipe water off the transducer with a sterile cloth or gauze.
3. Wipe any residue off the transducer with a soft cloth dampened with water.
4. After cleaning, spray or wipe the transmitter with disinfectant. Follow the contact times and methods recommended by the disinfectant manufacturer.